Key Features
- The simplest way to send your microphone signal to multiple destinations
- Crystal clear sound thanks to a Jensen audio transformer
- Quickly eliminate hums and buzzes with the ground-loop switch
- Compact, robust design is perfect for professional stage and studio use
Radial JS3 Passive Microphone Splitter Overview
Pristine sound. For a flawless performance. With the Radial JS3 Passive Microphone Splitter, it's easy to send your signal to multiple destinations. No hassle, guaranteed. Enjoy zero signal degradation, zero distortion, and zero unwanted noise courtesy of a Jensen transformer. This is everything you need for the clearest sound possible.
Built for professional use. With a single isolated output, the JS3 boasts optimal noise rejection, onstage and in the studio. Eliminate ground-loop noise with lift switches. Or reduce input sensitivity with the -30dB pad. It's all right there at your fingertips.
Perfect for any setup. Thanks to its robust, compact construction, the JS3 can be introduced into the tightest of stage or studio spaces. Never worry about knocks and drops getting in the way of your performance. With its metal chassis, you're fully protected.
Product Ref: 113321
Full Description
View Full DescriptionPortable. Powerful. Practical
Split your signal without degradation. The Radial JS3 Passive Microphone Splitter features a flexible three-way design, offering exceptional sound as well as noise-elimination. With its military spec PCB, you’ll get less radio interference in every scenario. That means flawless performance onstage and in the studio. The JS3 gets its pristine signal integrity from a Jensen audio transformer, ensuring an extremely wide bandwidth. Whatever your setup, you can expect ultra-low phase shift, distortion, and unwanted noise. Even when connecting line level sources.
Features
- Easily send your microphone signal to three destinations simultaneously
- Exceptional audio quality from a Jensen audio transformer
- Optimal noise rejection from a dual isolated output
- Easily connect +4dB line-level devices with the -30dB input pad
- Instantly eliminate ground-loop noise with two ground lift switches
- Pristine signal integrity from a 600 ohm XLR mic input and Thru
- Direct 600 ohm Thru connects to main PA with phantom-power return path to microphone
- Excellent electrical and mechanical isolation from the no slip pad
- Robust steel construction ensures long life with zero damages
- Impossible to torque the PC board thanks to the I-beam enclosure
- Inputs and switches protected by an intuitive book end design
Specifications
- Audio Circuit Type: Passive mic/line splitter, transformer-based
- Number of Channels: 3-way splitter (one-in / three-out)
- Frequency Response: 20Hz - 20kHz (+0dB / -2dB)
- Dynamic Range: 140dB
- Maximum Input: +25dBu at 1kHz
- Total Harmonic Distortion: 0.0005 at 1kHz
- Phase Deviation: 0.7° at 100Hz, 2.8° at 20Hz
- Input Impedance: 2.4k?, unbalanced
- Output Impedance: 150?, balanced
- Construction: 14-gauge steel chassis and outer shell
- Finish: Durable powder coat
- Power: Passive, no power required
- Conditions: For use in dry locations only between 5°C and 40°C
- Dimensions: 84mm x 127mm x 48mm / 3.3'' x 5'' x 2''
- Weight: 0.7kg / 1.55lbs
Connectivity & Controls
- Transformer: JT-MB-DPC, 1:1:1 ratio
- Shield: Dual Faraday, MuMETAL can
- Input Pad: -30dB (allows line-level sources)
- Ground Lift: Disconnects XLR pin-1 at direct-2 and isolated output
- XLR Configuration: AES standard (pin-2 hot)
- Connectors:
- XLR-F in
- XLR-M direct; direct-2; isolated outputs
| Reviews of our service
View all
