Shure BLX188E/SM31-T11 Dual Wireless Headset System with 2 x SM31FH
This product is currently unavailable for delivery to your country
Key Features
- 863MHz - 865MHz wireless operating frequency range
- User friendly dual wireless system for fitness instructors
- Lightweight, moisture resistant headset microphone
- Uninterrupted signal thanks to Quickscan technology
- 14-hour battery run time and 100 meter range
Shure BLX188E/SM31-T11 Dual Wireless Headset System with 2 x SM31FH Overview
The BLX188/SM31 Wireless System can handle your most intense workouts. The SM31 Fitness Headset is made from corrosion proof materials. You can sweat on it, shout into it, and it will perform just as you need it. Combined with the BLX88 dual receiver, you can seamlessly run both SM31 headset mics at the same time.
Built to ensure rock solid signal from transmitter to receiver. Shure BLX Wireless Systems eliminate interference and drop-outs. You'll sound completely clear. And thanks to one-touch Quickscan technology, all the hard work is done for you. Locating the best frequency for your performance is as easy as pushing a button. No trial and error. No complicated set up. Just one press.
Product Ref: 102955
Full Description
View Full DescriptionSo how do I get set up?
It's simple. Plug the mic outputs (found on the back of the receiver) into a channel on your mixing desk. Just like a normal wired mic.
Press the group button on the receiver to perform a Quickscan. This searches your environment to locate the clearest frequency for your performance.
Finally, 'pair' the bodypack transmitters to the receiver, by using the transmitter's group and channel buttons. The 'ready' LED on the receiver will light up. And it's as easy as that! You can now perform with wireless freedom.
SM31FH Headset Microphone
The SM31 Fitness Headset has been specially made for aerobics and fitness instructors. Its rugged, wire-form design is built to last, and will stay in place even during high energy workouts. And because it's been assembled with lightweight components, you can comfortably wear it for hours.
It sounds exceptionally clear too, offering the same quality as Shure’s famous handheld mics. And thanks to moisture resistant fabrics, the mic capsule is completely safe from sweat.
Comprehensive monitoring
With a Shure BLX188E System, you get wireless freedom with total peace of mind. The receiver’s ‘ready’ LED will tell you when your system is set up and secure. You don’t need to worry about signal dropouts.
If the channel starts clipping, an LED switches from green to red, letting you know if you should activate the transmitter's -10dB gain control. There is even an LED monitor to tell you when the batteries are running low on the transmitter. Everything is clear and simple, for effortless setup straight out the box.
Legendary Shure durability
Boasting the tour-tough construction Shure are revered for.
The BLX188E/SM31-T11 has been rigorously tested to make sure it can handle any environment. All Shure wireless systems are subject to heat, cold, humidity and the ‘Shure drop test’. They are built to survive the demands of life on the road. They're ready for every performance.
Included Within The System
- 1 x Shure BLX88 Analogue Dual Channel Receiver
- 2 x BLX1 Bodypack Transmitter
- 2 x SM31FH-TQG Headset Microphone
- 2 x Clothing Clip
- 4 x Windshields
- 1 x Power Supply
- 4 x AA battery
Features
Shure SM31FH-TQG Headset Mic
- Comfortable and lightweight wire frame design
- Moisture resistant fabrics protect mic from sweat
- Super secure fit even during high energy workouts
- Clear, detailed sound similar to quality handheld mics
- Cardioid polar pattern focuses only on your voice
- Flexible gooseneck for quick, easy adjustments
- Windscreen tames wind and breath noise
- Clothing clip keeps cable tucked away
- Permanently-charged condenser capsule (phantom power not required)
- TA4F (TQG) connector compatible with any Shure bodypack
BLX1 Body Pack Transmitter
- 14-hour run time and a 100 meter range from one pair of AA batteries
- Quick and easy frequency matching
- Continuously adjustable gain dial
- Easily accessible on/off switch
- Power & battery status LED
- Clip-on design easily attaches to performer
- Lightweight, comfortable and discrete build
- Rugged and robust - built for rigorous live performances
- TA4F (TQG) connection for use with Shure headset, lavalier, instrument mics and guitar cables
BLX88 Dual Channel Receiver
- User friendly and intuitive design – no complicated setup options
- One touch QuickScan finds the best open frequency for uninterrupted signal
- Internal microprocessor-controlled antenna keeps the unit discrete and compact
- Two colour LED for monitoring signal level
- Compatible with up to 12 other systems
- XLR & 1/4" audio outputs
Specifications
SM31FH Headset Microphone
- Connector: TA4F (TGQ)
- Type: Condenser
- Frequency Response: 45Hz - 20kHz
- Polar Pattern: Cardioid
- Output Impedance: 600Ω
- Audio Output Level: -50 dBV/Pa
- Signal-To-Noise Ratio: 66dB
- Maximum SPL: 145.0 dB
- Dynamic Range: 117 dB
- Equivalent Output Noise: 28 dB
- Power Requirements: +5 V DC, 10 V Maximum
- Cable Length: 1.1m
- Net Weight: 60 g
BLX1 Body Pack Transmitter
- Connector Type: TA4F (TGQ)
- Operating Range (Up To): 100 m
- Batteries: AA (included)
- Battery Life: 14 hour
- Battery Status: Multi-Colour LED
- Transmitter Housings: Molded ABS
- Gain Adjustment Range: 26 dB
- Included Antenna: 1/4 Wave
- Input Impedance: 1 MΩ
- Weight: 75 g
- Dimensions (H x W x D): 110 mm x 64 mm x 21 mm
BLX88 Dual Channel Receiver
- Transmission: Analog
- Power Supply: External
- Receiver Type: Dual
- Number Of Compatible Systems Per Frequency Band: 12
- Receiver Displays: LEDs
- Housings: Molded ABS
- Scan Features: Quick Scan
- Rack Hardware: Optional URT2
- Image Rejection: 50 dB, Typical
- RF Sensitivity: -105 dBm, For 12dB SINAD, Typical
- Weight: 241 g
- Dimensions (H x W x D): 40mm x 388mm x 116mm
| Reviews of our service
View all
