Shure BLX14/SM35-T11 Wireless Headset System with SM35

Full Description

So how do I get set up?

It's simple. Plug the mic output (found on the back of the receiver) into a channel on your mixing desk. Just like a normal wired mic.

Press the group button on the receiver to perform a Quickscan. This searches your environment to locate the clearest frequency for your performance.

Plug your SM35 headset into the TGQ connection on the transmitter. Use the group and channel buttons to ‘pair’ the transmitter to the receiver. The 'ready' LED on the receiver will light up. Finally, turn up the transmitter gain dial to suit your voice. And it's as easy as that! You can now perform with wireless freedom.

SM35 Headset Microphone

Shure have used hand-picked components to create a uniquely lightweight and comfortable headset. Without compromising durability. Subject to the same extreme testing as any other Shure mic, the SM35 simply out-lasts the competition.

Move freely, without picking up the sound around you. The headset's tight cardioid polar pattern focuses only on your voice. As well as sounding completely clear, it will greatly reduce unwanted feedback from nearby stage monitors.

More than great sound. Great feel. Thanks to a slender wire form design, the SM35 is comfortable and unobtrusive. It’s calibrated to stay totally secure, even during high energy performances. It can be worn in any situation. And the flexible gooseneck design allows for quick and precise adjustments. There’s even a clothing clip, so you can tuck the headset cable out the way.

Comprehensive monitoring

With a Shure BLX System, you get wireless freedom with total peace of mind. The receiver’s ‘ready’ LED, telling you when your system is set up and secure. You don’t need to worry about signal dropouts.

If the channel starts clipping, an LED switches from green to red, letting you know when to adjust the transmitter's gain. There is even an LED monitor to tell you when the batteries are running low on the transmitter. Everything about the BLX Wireless System is clear and simple, for effortless setup straight out the box.

Legendary Shure durability

Boasting the tour-tough construction Shure are revered for.

The BLX14E/SM35-T11 has been rigorously tested to make sure it can handle any environment. All Shure wireless systems are subject to heat, cold, humidity and the ‘Shure drop test’. They are built to survive the demands of life on the road. They’re ready for every performance.

Included in the Box

• 1 x SM35 Headset Microphone
• 1 x BLX1 Body Pack Transmitter
• 1 x Shure BLX4 Analogue Single Channel Receiver
• 1 x Clothing Clip
• 2 x Windshields
• 1 x Power Supply
• 2 x AA battery

Features

SM35 Headset Microphone

• Comfortable wire frame design
• Flexible gooseneck for quick, easy adjustments
• Secure fit even during energetic performances
• Clear, detailed sound similar to quality handheld mics
• Cardioid polar pattern focuses only on your voice
• Windscreens tame plosives for improved intelligibility
• Reliable in extremely hot and humid environments
• Clothing clip keeps cable tucked away
• Permanently-charged condenser capsule (phantom power not required)
• TA4F (TQG) connector compatible with any Shure bodypack

BLX1 Body Pack Transmitter

• 14-hour run time and a 100 meter range from one pair of AA batteries
• Quick and easy frequency matching
• Continuously adjustable gain dial
• Easily accessible on/off switch
• Power & battery status LED
• Clip-on design easily attaches to performer
• Lightweight, comfortable and discrete build
• Rugged and robust - built for rigorous live performances
• TA4F (TQG) connection for use with Shure headset, lavalier, instrument mics and guitar cables

BLX4 Single Channel Receiver

• User friendly and intuitive design – no complicated setup options
• One touch QuickScan finds the best open frequency for uninterrupted signal
• Internal microprocessor-controlled antenna keeps the unit discrete and compact
• Two colour LED for monitoring signal level
• Compatible with up to 12 other systems
• XLR & 1/4" audio outputs

Specifications

SM35 Headset Microphone

• Connector: TA4F (TGQ)
• Type: Condenser
• Frequency Response: 40Hz - 20kHz
• Polar Pattern: Cardioid
• Phantom Power Requirement: Supplied from bodypack
• Output Impedance: 600Ω
• Audio Output Level: -50 dBV/Pa
• Signal-To-Noise Ratio: 66dB
• Maximum SPL: 145.0 dB
• Dynamic Range: 117 dB
• Equivalent Output Noise: 28 dB
• Cable Length: 1.1m
• Net Weight: 72 g

BLX1 Body Pack Transmitter

• Connector Type: TA4F (TGQ)
• Operating Range (Up To): 100 m
• Batteries: AA (included)
• Battery Life: 14 hour
• Battery Status: Multi-Colour LED
• Transmitter Housings: Molded ABS
• Gain Adjustment Range: 26 dB
• Included Antenna: 1/4 Wave
• Input Impedance: 1 MΩ
• Weight: 75 g
• Dimensions (H x W x D): 110 mm x 64 mm x 21 mm

BLX4 Single Channel Receiver

• Transmission: Analog
• Power Supply: External
• Receiver Type: Single
• Number Of Compatible Systems Per Frequency Band: 12
• Receiver Displays: LEDs
• Housings: Molded ABS
• Scan Features: Quick Scan
• Rack Hardware: Optional URT2
• Image Rejection: 50 dB, Typical
• RF Sensitivity: -105 dBm, For 12dB SINAD, Typical
• Weight: 241 g
• Dimensions (H x W x D): 40 x 188 x 103 mm