Key Features
- Intuitive passive wall-mounted direct injection box
- Buzz and hum rendered a thing of the past thanks to exceptional transformers
- Total manipulation of signal via level control, mono switch, and ground lift
- Rugged, durable design ensures long lasting life
Radial StageBug SB5W Wall-Mounted Stereo Direct Box Overview
An intuitive, efficient, permanently mountable DI solution. Meet the Radial StageBug SB5W Wall-Mounted Stereo Direct Box. This handy, little device is designed to perfectly fit inside a standard electrical wall-plate. It provides you with an effective way to connect an unbalanced audio signal or line-level source to a balanced audio system.
Crafted from heavy-duty 14 gauge steel, the SB5W ensures exceptional durability, as well as superior protection from electromagnetic interference. The front panel is equipped with 3.5mm TRS and RCA connectors, as well as a mono summing switch and a 'set & forget' ground lift switch, and fully-variable level control. With two great-sounding transformers, the SB5W is a high-quality passive DI solution with an easy-to-use design and superior low-noise performance.
Product Ref: 43260
Full Description
View Full DescriptionFeatures
- Intuitive control panel
- Passive design with no power needed
- Contractor-friendly screw terminals
- Transformer-isolated for noise elimination
- Fits in a standard single-gang electrical wall plate
- Provides the AV integrator with a simple and effective means of connecting an unbalanced analog audio source or line-level source to a balanced audio system
- Permanently-mountable interface
- All-steel construction for maximum durability
- Fully-shielded back-box helps eliminate pollution from electromagnetic fields
- Front-panel 3.5mm TRS and RCA connectors
- Standard interface for any stereo source
- Fully-variable level control
- Two great sounding transformers for converting high-impedance signal to a balanced low-impedance
- Capable of driving cables upwards to 100 meters without noise
- Elimination of hum and buzz caused by ground loops and stray DC voltages
- 'Set & Forget' ground lift switch
- Recessed mono switch passively sums the stereo signal to a single output
- Screw terminals with tie-down points for tie-wraps for quick and easy permanent installation
- Durable black powder-coated finish
- Sized to fit a standard Decora wall plate
Specifications
- Audio Circuit Type: Passive Transformer Isolated
- Frequency Response: 20Hz - 20kHz
- Dynamic Range: >120dB
- Noise Floor: -101dBu
- Equivalent Input Noise: -98dBu
- Maximum Input: +20dBu
- Phase Deviation:
- 0° at 100Hz
- -3° at 50Hz
- Total Harmonic Distortion: 0.002
- Input Impedance: Approximately 10K with 100K load
- Output Impedance: 5k Ohms
- Gain: -3dB
- Clip Level - Output: +17dBu
- Stereo Separation: >77dB
- Controls: Level control adjustable passive trim
- Mono: Mixes left and right inputs
- Ground Lift: Disconnects audio ground at both terminals
- Inputs: RCA and 3.5mm TRS stereo inputs
- Outputs: Screw down terminals (- G +)
- Construction: 14 gauge steel chassis and outer shell
- Finish: Black powder coat
- Length: 2.42'' / 61.4mm
- Width: 1.62'' / 41.1mm
- Height: 4.24'' / 107.7mm
- Weight: 0.5lbs / 0.227kg
- Power: Passive, no power required
- Conditions: For use in dry locations only between 5°C and 40°C
- Installation: Only use in low votlage systems and enclosures
- Product Code: R800-0155-00
| Reviews of our service
View all
