OFFLINE Peavey Impulse 12D and Mackie ProFX16 PA System Bundle

Full Description

The Mackie ProFX16 Mixer is the clear solution for any midsized venue or band that needs great sound, but doesn't have the budget or space for tons of outboard gear.

Mackie ProFX16 Channel Mixer

The ProFX16 Mixer delivers a live sound toolbox with high-headroom mic preamps, great-sounding effects, smooth compression and flexible channel EQ plus precision GEQ to tune-up the room or monitor mix.

The Running Man FX 32-bit effects processor brings 'gig-ready', useable effects to your mixes. The RMFX processor features 16 solid FX that are known for their utility. Simple, rich choruses and an array of practical delays enable you to create professional mixes without requiring a two-hour sound check. The choicest parts of a full rack of gear, easy to master and right at your fingertips.

The ProFX16 features four dedicated in-line compressors, delivering simple, sweet dynamic control with the single twist of a knob. Use the compressors on channels 5-8 for vocals, bass or anything that's dynamic and needs to sit a little better in the mix.

Portability is paramount and you can't be burdened with lugging around additional equipment. Integrated USB I/O takes the pain out of recording. Just connect the ProFX16 to a laptop, start up your included copy of Tracktion 3 Music Production Software (or almost any DAW software out there) and you can record the whole mix. And with a push of a button, you can route your USB return through channels 15/16, allowing you to apply some EQ or easily integrate performance software into the set. Archiving your integrated live performances has never been easier!

Mackie is known for building strong mixers, and the ProFX16 is no exception. All of its tender bits are securely encased in a solid steel chassis. Not only that, the impact-resistant sidecheeks are made of ultra-tough ABS, adding extra protection where it is most likely to fall.

Peavey Impulse 12D Ribbon Active Speaker

The Impulse 12D powered enclosure features a true ribbon driver and a 12" field-replaceable dual voice coil premium neodymium speaker. A Woofer Servo circuit monitors back-EMF and controls cone motion, ensuring the cone's movement mirrors the driving signal from the power amp, and resulting in very low distortion, high power handling and rock-solid low-frequency attack. The advanced new ribbon driver - an exclusive Peavey design based on the ribbons used in the Peavey Versarray line array - provides 90 degree H x 30 degree V coverage, with sonically transparent reproduction.

Utilising Peavey's revolutionary IPR™ power amplifier technology, the Impulse 12D produces 1,200 watts of efficient power while weighing a very lightweight 39 lbs. IPR amplifiers are designed with a lightweight switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available.

The Input section features two input channels and a line output, with a mix of I/O options such as combination XLR-1/4" jacks, RCA and install-ready Phoenix connections. Input channels 1 and 2 also have mic/line source switches and gain controls. The Auto-Off function automatically shuts off the power when it no longer detects a signal, while the Line Out allows the user to chain multiple units or send the input signal to another source.

The DynaQ™ section offers advanced tone controls such as Bass Enhancer, which is an overall loudness boost; a Music/Speech switch that provides optimised EQ settings for each audio type; and Contour, specially configured for program music. A module bay allows for future expansion including Wireless I/O, Delay/Time Adjustment, Mixer Expander, Ethernet I/O and more.

The Impulse 12D is housed in a durable, injection-moulded enclosure that includes a pole mount, three flying points and a tilt-back design to facilitate use as a personal monitor.

Pair of Speaker Stands

A set of 2 height adjustable, 35mm PA speaker stands with a strong, water resistant, canvas carry bag. These height adjustable PA speakers from Gear4music boast solid construction with bolt and safety screw connections. The stands are suitable for all PA speakers with standard 35mm diameter pole mounts.

Mixer Bag

To keep your mixer in top condition during transport, the Mackie ProFX16 Padded Mixer Bag uses high-impact, high-density foam and durable nylon. It features a study, padded shoulder strap and is reinforced with tarped corners for easy transportation and protects against the elements. There are even two zippered and padded outer pockets for your accessories.

Mic Cable

Balanced 6m Microphone Cable with XLR connections, for use as a microphone cable, instrument cable or patching cable.

ProFX16 Channel Mixer Features/Specifications

• Mixer: Professional 16-channel 4-bus mixer with onboard effects and USB I/O
• Mic Preamps: 10 low-noise, high-headroom Mackie mic preamps with +50dB gain range
• Processor: 32-bit RMFX processor with 16 "Gig-Ready" reverbs, choruses and delays
• USB: USB I/O for recording shows and music playback via Mac or PC
• EQ: 3-band EQ with sweepable midrange on mono channels
• Line Inputs: 16 high-headroom line inputs (8 mono, 4 stereo)
• Faders: 60mm faders for input channels, subgroups and mains
• Phantom Power: 48V phantom power with LED for use with condenser mics
• Power Supply: Switching multi-voltage power supply for worldwide use
• Compression: Dedicated inline compression for critical inputs (ch. 5-8)
• EQ: Precision 7-band graphic EQ for tuning mains and monitors
• Casing: Rugged steel chassis
• Includes: Tracktion 3 Music Production Software for Mac or PC

For more detailed information about the Mackie ProFX16, please download the owner's manual from the link below.

Peavey 12D Impulse Ribbon Active Speaker Features/Specifications

• Auto off control: Yes
• Channels: Two independently mixed input channels, with level controls and mic/line switch
• Speaker: 12" field-replaceable dual voice coil premium neodymium speaker
• Loudspeaker: Two-way, bi-amplified, optimised active servo drive loudspeaker system
• Driver: Proprietary 120 mm ribbon driver on a low-coloration wave guide
• Connectors: Combo XLR-1/4" and Phoenix connectors on channel 1, Combo XLR-1/4" and RCA connectors on channel 2
• Outputs: XLR, 1/4" TRS and Phoenix outputs on Line Out
• Casing: Rugged polypropylene moulded enclosure with tilt-back design for monitor use
• Pole Mountable: Yes
• LED control switch: Power/Signal/Off
• Power: 1,200 watts from Peavey IPR(YM) power section

Speaker Stands with Carry Bag Features/Specifications

• Colour: Black
• Material: Aluminium
• Dimensions: 1000mm x 150mm x 150mm
• Weight: 2.6kg
• Max Load: 20kg
• Height Adjustment: 1000mm - 1800mm
• Top Hat: 35mm

Mixer Bag Features/Specifications

Microphone Cable Features/Specifications

• Length: 6m / 20ft
• Jacket and Insulation: PVC
• Spiral Shield: 64 x 0.12mm
• Conductors: 20 x 0.12mm
• Connectors: Male XLR to Female XLR
• Colour: Black